Posted on by Abe Austin

Scriptural Analysis- Exodus 26:22-25

22 And for the sides of the tabernacle westward thou shalt make six boards.

23 And two boards shalt thou make for the corners of the tabernacle in the two sides.

24 And they shall be coupled together beneath, and they shall be coupled together above the head of it unto one ring: thus shall it be for them both; they shall be for the two corners.

25 And they shall be eight boards, and their sockets of silver, sixteen sockets; two sockets under one board, and two sockets under another board.

Yesterday we heard how the sides of the tabernacle would be formed by erecting twenty boards side-by-side, now we hear of the back of the tabernacle, on the West side, which was to be made of six main boards and two corner boards. It is not specified if there was anything unique about the corner boards. Perhaps they were not as wide as the others, or perhaps they were folded in ninety-degrees to form a corner, or perhaps they were laid at an angle between the back and the side of the tabernacle.

In any case, the width of the tabernacle seems to be, at most, eight boards at one-and-a-half cubits each, or 12 cubits in all. As mentioned yesterday, the length of the tabernacle was 30 cubits and the height was 10, so it was 2.5 times as long as it was wide, 3 times as long as it was tall and only slightly wider than it was tall.

The first curtain laid over the tabernacle was twenty-eight cubits long, and the second was thirty. Covering from the north side to the south side would be 10 cubits for the height of one wall, 10 cubits for the height of the other, and the 12 cubits mentioned for the width in today’s verses, coming to a total of 32 cubits, which would suggest that neither of the curtains could reach all the way from end-to-end. This might mean that the curtains ended in ropes and that were staked into the ground, or it might mean that the socketed parts of the boards were embedded in the ground, which would make all the walls shorter, which could then be covered by both layers of curtain.

One last point is how the corners are “coupled” together at the top and the bottom. This would suggest that there was some sort of fastener that would hold the north wall and the south wall to the back. This is the first we’ve heard of supporting elements to hold the tabernacle as one, but we will hear more of these elements in tomorrow’s verses.

Note: It can be difficult to visualize some of the structures described in these verses. Here is an excellent and extremely focused series of animations that show the visual form of the temple and its instruments, built up verse-by-verse from the Exodus record: https://youtube.com/playlist?list=PLpjohncRg94EZ55nJrbaKfi-lfeo3MFgl&si=6wm1J9Sdnu7LKYC_

Posted on by Abe Austin

Scriptural Analysis- Exodus 26:18-21

18 And thou shalt make the boards for the tabernacle, twenty boards on the south side southward.

19 And thou shalt make forty sockets of silver under the twenty boards; two sockets under one board for his two tenons, and two sockets under another board for his two tenons.

20 And for the second side of the tabernacle on the north side there shall be twenty boards:

21 And their forty sockets of silver; two sockets under one board, and two sockets under another board.

Today we start to get the count of the boards. The tabernacle would have two long sides, which would face to the North and the South. They would each be comprised of 20 boards, each board was a cubit-and-a-half wide, so 30 cubits length in all, or approximately 45 feet.

The first layer of curtains we were told was to be made of ten parts, each four cubits wide, so forty cubits for the whole, which would be enough to cover the entire length of thirty cubits for the tabernacle and the ten cubits of height for the back wall. The second layer of curtains was made of eleven parts, so forty-four cubits for the whole, which would be enough to cover the top, the back, and have a little left over at the front to form a border around the entrance, as was described in those earlier verses.

Yesterday we also heard how each board would be forked into two tenons at the base, and today we hear that these would each be inserted into a double socket made of silver, providing a solid foundation for the structure.

Note: It can be difficult to visualize some of the structures described in these verses. Here is an excellent and extremely focused series of animations that show the visual form of the temple and its instruments, built up verse-by-verse from the Exodus record: https://youtube.com/playlist?list=PLpjohncRg94EZ55nJrbaKfi-lfeo3MFgl&si=6wm1J9Sdnu7LKYC_

Posted on by Abe Austin

Scriptural Analysis- Exodus 26:1-3

1 Moreover thou shalt make the tabernacle with ten curtains of fine twined linen, and blue, and purple, and scarlet: with cherubims of cunning work shalt thou make them.

2 The length of one curtain shall be eight and twenty cubits, and the breadth of one curtain four cubits: and every one of the curtains shall have one measure.

3 The five curtains shall be coupled together one to another; and other five curtains shall be coupled one to another.

In later verses we will learn how the frame of the tabernacle was to be built, and that it would be covered with the curtains that are described in these verses. Each individual curtain would be a very long rectangle, 7 times as long as they were wide, which seems a symbolic ratio to me.

The construction of each curtain would be done with “fine twined linen,” meaning many separate strands of flax woven together, and they would be stitched with the pattern of a cherubim, which was to be an intricate, “cunning work.” Thus, there was to be complexity and multiplicity in this border, a unifying of separate strands to create both a functional and beautiful whole.

That unifying of separate parts continues as we are told that the ten curtains were to be joined together in two main parts. Five curtains for one part, five for the other. From the following verses we will be made to understand that each curtain would be joined to its neighbor along the long sides. Thus the two composite pieces would become twenty-eight cubits by twenty, nearly a square. How the five curtains would be joined together is not clear. Perhaps they were stitched together, permanently bound together as one after first being formed as individuals. By whatever method, though, the ten had become two.

Note: It can be difficult to visualize some of the structures described in these verses. Here is an excellent and extremely focused series of animations that show the visual form of the temple and its instruments, built up verse-by-verse from the Exodus record: https://youtube.com/playlist?list=PLpjohncRg94EZ55nJrbaKfi-lfeo3MFgl&si=6wm1J9Sdnu7LKYC_

Posted on by Abe Austin

Scriptural Analysis- Exodus 25:23-25

23 Thou shalt also make a table of shittim wood: two cubits shall be the length thereof, and a cubit the breadth thereof, and a cubit and a half the height thereof.

24 And thou shalt overlay it with pure gold, and make thereto a crown of gold round about.

25 And thou shalt make unto it a border of an hand breadth round about, and thou shalt make a golden crown to the border thereof round about.

We now shift from the Ark of the Covenant to the descriptions for a table. As with the ark, we start with the materials and dimension. The width is to be double the breadth, and the height will be halfway in between. I may be reading too much into this, but it occurs to me that each side could be used to measure the others. The breadth folded over the length should reach exactly halfway across. The breadth folded over the height should leave just enough that the remainder could be folded over exactly half of the height. The height folded over the length should leave just enough to cover exactly half of the breadth. Like the Godhead, three separate sides, but each able to measure and define one another.

Also, the height of the table, a cubit-and-a-half, is exactly the same height as the Ark of the Covenant, showing that they are a pair. The other dimensions of the table, however, the length and the breadth, are each smaller than the corresponding sides of the ark. It is not a very large table, and it will only be used for a specific purpose.

Just like the heights, the material and ornamentation of the table exactly matches that of the ark. Shittim wood to make the shape and body, with pure gold overlaid everywhere. There is also to be a border that hangs a little ways down from the top slab, and it is to be ornamented with a golden crown, just as with the ark.

Consistency of design immediately speaks to consistency of purpose. Not to say that both the ark and the table would perform the same function, obviously they wouldn’t, but ark that stores and the table that bears would be united in a common purpose of ultimate spiritual observation. One would only have to see them to know these two are organs of the same body.